Skip to main content

Newer Post or latest post

what is data cable? Types of cables, uses of data cables, importance of data cable explained!

Introduction of data cables Data cable is an important part of computer network model . From smartphone to supercomputer connections and wide range network uses and network models. It helps in network model in different types of topology models also. But we discuss what exactly called a data cable? How it is working with network model? Why these data cables are so important? In this guide, I will provide some information about the definitions, types, uses of data cables on network model with easy explanation of data cable covered topics. What is data cable? [Definition] A data cable is a wire that can transfer the data from one to another computer system. It connects to the ports available on the computer system. The user can transfer the data from one computer to another data cable connection. If two computers are connected then:- In according to data cable male port:- Port 1:- the male port of data cable is used to receive the data from the sender computer. Port 2:- th...
Post a Comment

Main Component of PC system


"Hi everyone, I'm Rudra, a CS engineer and passionate blogger. Welcome to my post on [Main Component of PC system . ], where I'll share insights on Information Technology and Computer Science education. My goal is to provide helpful information and answer your questions. Feel free to ask me anything in the comments below. Let's dive into today's topic…🙂”


Q. What are the main components of the PC System ?

There are the main component of the PC system are the following:-

 

Q. What are the main component of the PC System ? There are the main component of the PC system are the following:-

Power switch 

Depending on the model, the power switch is located either in the front or at the side of the system unit and is used to switch the system ON and OFF.

The power switch button is connected to the power connectors to provide the current passes through the power connector and then the motherboard gets a supply of power to supply also other installed and connected devices such as ram, rom, storage device, permanent memory, smps etc. it is happened when the user on the ups and then press the power button and on the cpu cabinet of the desktop computer system.


Power switch Depending on the model, the power switch is located either in the front or at the side of the system unit and is used to switch the system ON and OFF.

"The figure above shows the diagram of power connectors connected through the pins that are available on the motherboard or PCB (Printed Circuit Board) of the desktop computer system cabinet of the CPU".


Power connectors available pins and mentioned where the number is used to connect on the motherboard that means the motherboard has a name to connect the power connectors printed on the board during the manufacturing work on the motherboard and that is why it is called the printed circuit board or PCB of the computer system.


Reset Button 

The Reset button can be used to restart the PC without switching off the main power supply. However, it is advisable to use this switch as a last option when the PC hangs and does not accept a command from the keyboard. When you restart the PC, it will lose all the information currently stored in its memory.

Reset button is used to removes the data which is currently used in the computer system and the end user working on the particular application software cannot be save it is just removed from the memory, the memory is known as temporary memory RAM to removes the data and files after reset pressing the button from the CPU cabinet of the desktop computer system.


Reset Button The Reset button can be used to restart the PC without switching off the main power supply.


The reset button is working as the restart button without power switching off then on and it is just you can see it automatically restart the computer system.

The temporary memory removes all the file such as if you are working on the application software and the application software provides the space using the RAM to type the text in the file but it is not saved on the permanent memory then it will be removed from the RAM because the RAM is temporary memory of the computer system.


Turbo Switch 

If you are using a PC that has a different speed of operation, you will find a Turbo switch changes the speed from a low value to a high or vice versa to reduce or increase a computer's speed for ensuring software compatibility. On the other hand, modern programs take into account the computer's speed and adjust themselves accordingly. Hence, although the Turbo button is present, some modern computers have completely disabled this function.

Indicator Lights

Computer unit may have colored lights to indicate the working of the PC. These lights also glow whenever data is recorded onto or read from the floppy. or hard disk.

Floppy Drives

Your PC will have one slot fitted with a floppy drive. Floppy drive is used for storing data or for reading data from a floppy disk.

Can a computer remove data from RAM after a restart?

A computer removes data from RAM after restarting the computer system.

The computer refreshes the ram to clear it to store new data into the RAM.

The RAM is a temporary memory to store only for temporarily used on the computer for programs running into the computer and stores a program file in RAM available space.

The RAM is removed from their stored data because it is not a permanent and not a non-volatile memory. It is a volatile memory which only temporarily stores the program file which can be used again in the ram after turning on a computer using the same application software.



the answer is till remain form the next blog post ..... (Click here)
Please subscribe to my blog...... enter E-Mail to get notification....
-----------------------------------------------------------------------------------------------------------------------------

Hello guys, I hope you can learn from this post easily  from “Main Component of PC system ” and you get the right information from this post that I have posted related to information technology and computer science topics with questions and answers. Thanks for reading our content 🙂 👍
"I appreciate your attention to this topic! If you have any thoughts or questions, please feel free to share them in the comments below. Until next time, stay curious and keep learning!"



My latest post is here links below about the databases technology

What are the components of data model in [DBMS] Relational Database Management System?

There are five main components of data model... 👉 click here 👈

What is stability of the distributed database management system?

In the distributed database model there are.... 👉 click here👈
Labels:
Location: IDPL Colony, Rishikesh, Uttarakhand, India

Comments

Post a Comment

Popular posts from this blog

About the memory and its Classification of the computer Memory

"Hi everyone, I'm Rudra, a CS engineer and passionate blogger. Welcome to my post on [About the memory and its Classification of the computer Memory. ], where I'll share insights on Information Technology and Computer Science education. My goal is to provide helpful information and answer your questions. Feel free to ask me anything in the comments below. Let's dive into today's topic…🙂” What are the memories in the reference of computer system? What is Computer Memory?:- The memory is the essential for the computer to store the data, instruction and information. Without memory, computers are not be able to store data, instruction etc. The memory is an essential part of a computer system. It is require by the computer system to store information. Memory can be divided into the following two categories types: i) Primary or Main memory ii) Secondary Memory or Permanent memory In this figure I'll show the classification of the memory of computer s...
Post a Comment
Read more

what are the function of the joystick and light pen?

Q 1. State the functions of a joystick and that of a light pen? Introduction to the joystick device, virtual or soft joystick tool, game controller, virtual or soft game controller and light pen topics are covered below here: Joystick What is the meaning of the joystick in computer? What is the joystick as a peripheral device in the computer system? What is main use of joystick in computer system peripheral devices? What is the purpose of the joystick in computer? What are the types of joysticks in the peripheral system for game purpose? What do you mean by analog joystick in peripheral system? What are the advantages of analog joystick device? What are the disadvantages or drawbacks of analog joystick device? What are the uses of joysticks? What are top 5 uses of joystick device in the computer system peripheral? Where is the use of joystick? How to connect the joystick for game in computer system? Can you connect the joystick to the laptop? Why do n...
Post a Comment
Read more

how the track ball is differ from the mouse and joystick

What are the differences between trackball, mouse and joystick devices? The differences are according to the track ball device verse mouse and joystick Trackball The track ball is a pointing device which contains a ball over the device or above the device. The track ball is a statics device that cannot move from one place to another. The track ball gives you a stability to use the device without moving the whole and just move the ball or roll the on the device. It uses as input device that depends on finger and thumbs only to moves the ball. It is slower than mouse due to cause the dependency the finger and thumb to move the ball to track the path of the pointer. What is trackball used for? The trackball is an input device which is used to provide 2 dimensions to move the ball over the device the ball is attached to. The trackball is used to move the pointer of the operating system where the ball is moved according to the position of the 2 dimensions x and y axis on the...
Post a Comment
Read more